# Electrolux Dishwasher i20 error Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-i20 AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-i20.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Dishwasher i20: the dishwasher did not drain completely. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: i20 - Model scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Region: United States / English ## What users may observe - i20 is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: the dishwasher did not drain completely - Water or condensate does not leave through the documented drain path as expected while i20 is active - The important observation is when i20 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the dishwasher did not drain completely - i20 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide ## Verified diagnosis - Photograph the complete i20 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Confirm that the observed condition matches the published meaning: the dishwasher did not drain completely - Published check — check the disposer knockout plug, drain hose, filter and sump before one controlled drain test - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if i20 remains, stop and move to exact-model diagnosis - Published check — If i20 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if i20 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - check the disposer knockout plug, drain hose, filter and sump before one controlled drain test - If i20 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If i20 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. check the disposer knockout plug, drain hose, filter and sump before one controlled drain test Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US dishwasher error-code and alarm guide - Source URL: https://owner.electrolux.com/support-articles/article/1829620-dishwasher-error-code-guide - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.