# Electrolux Dishwasher i30 error Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-i30 AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-i30.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Dishwasher i30: water-leak detection. This interpretation applies to Electrolux UK dishwasher models covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: i30 - Model scope: Electrolux UK dishwasher models covered by the linked support article - Region: United Kingdom / English ## What users may observe - i30 is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: water-leak detection - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when i30 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water-leak detection - i30 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Electrolux UK dishwasher models covered by the linked support article ## Verified diagnosis - Photograph the complete i30 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK dishwasher models covered by the linked support article - Confirm that the observed condition matches the published meaning: water-leak detection - Published check — close the water tap, inspect the appliance exterior for water, and arrange service if the leak warning remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for i30 - Published check — Give service the i30 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for i30 ## Evidence-backed actions - close the water tap, inspect the appliance exterior for water, and arrange service if the leak warning remains - Give service the i30 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. close the water tap, inspect the appliance exterior for water, and arrange service if the leak warning remains Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK dishwasher error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/dishwasher-displays-an-error-code-how-to-fix-it - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.