# Electrolux dishwasher i40 code Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-i40-code AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-i40-code.txt Last reviewed: 2026-08-03 ## Direct answer Electrolux Dishwasher i40: Clogged filter or sump. This interpretation applies to Electrolux dishwasher models listed by the linked official code table in US / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: i40 - Model scope: Electrolux dishwasher models listed by the linked official code table - Region: US / English ## What users may observe - i40 is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: Clogged filter or sump - The documented pump or circulation function does not complete as expected while i40 is active - The important observation is when i40 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Clogged filter or sump - i40 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed - Model boundary — apply this interpretation only to Electrolux dishwasher models listed by the linked official code table ## Verified diagnosis - Photograph the complete i40 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux dishwasher models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Clogged filter or sump - Stop the dishwasher - Remove and clean the user-accessible glass trap/filter as the exact model manual shows - Check the accessible sump area for food soil only - Refit the trap/filter correctly - Run the dishwasher once - Arrange Electrolux service if i40 returns - Published check — Electrolux identifies i40 as a clogged filter or sump caused by built-up food soil ## Evidence-backed actions - Electrolux identifies i40 as a clogged filter or sump caused by built-up food soil - Clean the user-accessible glass trap/filter as the exact model manual shows, refit it correctly, and run the dishwasher once - Do not open fixed panels or try to repair the sump - arrange service if the code returns - Give service the i40 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover. ## Primary evidence - Source: Electrolux US dishwasher and washer error codes - Source URL: https://owner.electrolux.com/support-articles/kitchen/dishwashers - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.