# Electrolux Dishwasher i40 error Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-i40 AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-i40.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Dishwasher i40: the dishwasher filter or sump is clogged. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: i40 - Model scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Region: United States / English ## What users may observe - i40 is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: the dishwasher filter or sump is clogged - The documented pump or circulation function does not complete as expected while i40 is active - The important observation is when i40 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the dishwasher filter or sump is clogged - i40 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed - Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide ## Verified diagnosis - Photograph the complete i40 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Confirm that the observed condition matches the published meaning: the dishwasher filter or sump is clogged - Published check — clean the accessible glass trap and filter, then run one controlled test - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if i40 remains, stop and move to exact-model diagnosis - Published check — If i40 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if i40 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - clean the accessible glass trap and filter, then run one controlled test - If i40 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If i40 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. clean the accessible glass trap and filter, then run one controlled test Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US dishwasher error-code and alarm guide - Source URL: https://owner.electrolux.com/support-articles/article/1829620-dishwasher-error-code-guide - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.