# Electrolux Dishwasher i50 error Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-i50 AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-i50.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Dishwasher i50: a wash-motor or pump malfunction. This interpretation applies to Electrolux UK dishwasher models covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: i50 - Model scope: Electrolux UK dishwasher models covered by the linked support article - Region: United Kingdom / English ## What users may observe - i50 is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: a wash-motor or pump malfunction - The affected motor, drive, or movement function is stopped or limited while i50 is active - The important observation is when i50 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a wash-motor or pump malfunction - i50 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed - Model boundary — apply this interpretation only to Electrolux UK dishwasher models covered by the linked support article ## Verified diagnosis - Photograph the complete i50 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK dishwasher models covered by the linked support article - Confirm that the observed condition matches the published meaning: a wash-motor or pump malfunction - Published check — stop the dishwasher, isolate power, and arrange authorised service - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for i50 - Published check — Give service the i50 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for i50 ## Evidence-backed actions - stop the dishwasher, isolate power, and arrange authorised service - Give service the i50 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. stop the dishwasher, isolate power, and arrange authorised service Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK dishwasher error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/dishwasher-displays-an-error-code-how-to-fix-it - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.