# Electrolux Dryer B4 error Canonical page: https://getfixfault.com/guides/electrolux-dryer-b4 AI-readable URL: https://getfixfault.com/guides/electrolux-dryer-b4.txt Last reviewed: 2026-08-26 ## Direct answer Electrolux Dryer B4: incorrect wiring. This interpretation applies to Electrolux US laundry dryers covered by the linked official error-code guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Dryer - Error code or indicator: B4 - Model scope: Electrolux US laundry dryers covered by the linked official error-code guide - Region: United States / English ## What users may observe - B4 is shown on the Electrolux dryer display, indicator, or connected app - The published condition is: incorrect wiring - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when B4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — incorrect wiring - B4 does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to Electrolux US laundry dryers covered by the linked official error-code guide ## Verified diagnosis - Photograph the complete B4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US laundry dryers covered by the linked official error-code guide - Confirm that the observed condition matches the published meaning: incorrect wiring - Published check — stop using the dryer and have the installation checked by the installer - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for B4 - Published check — Give service the B4 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for B4 ## Evidence-backed actions - stop using the dryer and have the installation checked by the installer - Give service the B4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary stop using the dryer and have the installation checked by the installer Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US dryer error-code guide - Source URL: https://owner.electrolux.com/support-articles/article/1820071-laundry-dryer-error-code-guide - Source checked: 2026-08-26 - Procedure verified: 2026-08-26 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.