# Electrolux Dryer C6 error Canonical page: https://getfixfault.com/guides/electrolux-dryer-c6 AI-readable URL: https://getfixfault.com/guides/electrolux-dryer-c6.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Dryer C6: a moisture-sensor problem. This interpretation applies to Electrolux UK tumble dryers covered by the linked C6 support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Dryer - Error code or indicator: C6 - Model scope: Electrolux UK tumble dryers covered by the linked C6 support article - Region: United Kingdom / English ## What users may observe - C6 is shown on the Electrolux dryer display, indicator, or connected app - The published condition is: a moisture-sensor problem - The control cannot confirm the documented measured condition or sensor reference represented by C6 - The important observation is when C6 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a moisture-sensor problem - C6 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Electrolux UK tumble dryers covered by the linked C6 support article ## Verified diagnosis - Photograph the complete C6 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK tumble dryers covered by the linked C6 support article - Confirm that the observed condition matches the published meaning: a moisture-sensor problem - Published check — stop using the dryer, disconnect it and arrange authorised service - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for C6 - Published check — Give service the C6 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for C6 ## Evidence-backed actions - stop using the dryer, disconnect it and arrange authorised service - Give service the C6 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. stop using the dryer, disconnect it and arrange authorised service Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK tumble-dryer C6 support - Source URL: https://support.electrolux.co.uk/support-articles/article/tumble-dryer-displays-error-message-c6 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.