# Electrolux Dryer ECA error Canonical page: https://getfixfault.com/guides/electrolux-dryer-eca AI-readable URL: https://getfixfault.com/guides/electrolux-dryer-eca.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Dryer ECA: the ProSteam water tank may be empty. This interpretation applies to Electrolux UK ProSteam tumble dryers covered by the linked ECA support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Dryer - Error code or indicator: ECA - Model scope: Electrolux UK ProSteam tumble dryers covered by the linked ECA support article - Region: United Kingdom / English ## What users may observe - ECA is shown on the Electrolux dryer display, indicator, or connected app - The published condition is: the ProSteam water tank may be empty - The affected fill stage does not receive or confirm the expected water supply while ECA is active - The important observation is when ECA appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the ProSteam water tank may be empty - ECA does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Electrolux UK ProSteam tumble dryers covered by the linked ECA support article ## Verified diagnosis - Photograph the complete ECA display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK ProSteam tumble dryers covered by the linked ECA support article - Confirm that the observed condition matches the published meaning: the ProSteam water tank may be empty - Published check — fill the steam tank to the MAX level and arrange service if the display remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for ECA - Published check — Give service the ECA photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for ECA ## Evidence-backed actions - fill the steam tank to the MAX level and arrange service if the display remains - Give service the ECA photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. fill the steam tank to the MAX level and arrange service if the display remains Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK ProSteam dryer ECA support - Source URL: https://support.electrolux.co.uk/support-articles/article/tumble-dryer-displays-error-code-eca - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.