# Electrolux Microwave F131 error Canonical page: https://getfixfault.com/guides/electrolux-microwave-f131 AI-readable URL: https://getfixfault.com/guides/electrolux-microwave-f131.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Microwave F131: the magnetron sensor temperature is too high. This interpretation applies to Electrolux UK microwave combi-ovens covered by the linked official error-code article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Microwave - Error code or indicator: F131 - Model scope: Electrolux UK microwave combi-ovens covered by the linked official error-code article - Region: United Kingdom / English ## What users may observe - F131 is shown on the Electrolux microwave display, indicator, or connected app - The published condition is: the magnetron sensor temperature is too high - The control cannot confirm the documented measured condition or sensor reference represented by F131 - The important observation is when F131 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the magnetron sensor temperature is too high - F131 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Electrolux UK microwave combi-ovens covered by the linked official error-code article ## Verified diagnosis - Photograph the complete F131 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK microwave combi-ovens covered by the linked official error-code article - Confirm that the observed condition matches the published meaning: the magnetron sensor temperature is too high - Published check — turn the microwave combi-oven off, allow it to cool and arrange service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for F131 - Published check — Give service the F131 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for F131 ## Evidence-backed actions - turn the microwave combi-oven off, allow it to cool and arrange service if the code returns - Give service the F131 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. turn the microwave combi-oven off, allow it to cool and arrange service if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK microwave-combi-oven error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/microwave-combi-oven-displays-error-code - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.