# Electrolux Range F31 error Canonical page: https://getfixfault.com/guides/electrolux-range-f31 AI-readable URL: https://getfixfault.com/guides/electrolux-range-f31.txt Last reviewed: 2026-08-25 ## Direct answer Electrolux Range F31: a shorted probe. This interpretation applies to Electrolux US electric ranges covered by the linked official error-code guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Range - Error code or indicator: F31 - Model scope: Electrolux US electric ranges covered by the linked official error-code guide - Region: United States / English ## What users may observe - F31 is shown on the Electrolux range display, indicator, or connected app - The published condition is: a shorted probe - The appliance has reached the manufacturer-defined stop or service condition associated with F31 - The important observation is when F31 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a shorted probe - F31 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Electrolux US electric ranges covered by the linked official error-code guide ## Verified diagnosis - Photograph the complete F31 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US electric ranges covered by the linked official error-code guide - Confirm that the observed condition matches the published meaning: a shorted probe - Published check — disconnect range power for up to 30 seconds and contact service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for F31 - Published check — Give service the F31 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for F31 ## Evidence-backed actions - disconnect range power for up to 30 seconds and contact service if the code returns - Give service the F31 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. disconnect range power for up to 30 seconds and contact service if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US electric-range error-code guide - Source URL: https://owner.electrolux.com/support-articles/article/1846380-ranges-error-code-guide - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.