# Electrolux Refrigerator PF error Canonical page: https://getfixfault.com/guides/electrolux-refrigerator-pf AI-readable URL: https://getfixfault.com/guides/electrolux-refrigerator-pf.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Refrigerator PF: a power outage or surge was detected. This interpretation applies to Electrolux US refrigerators covered by the linked official error-code and alarm guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Refrigerator - Error code or indicator: PF - Model scope: Electrolux US refrigerators covered by the linked official error-code and alarm guide - Region: United States / English ## What users may observe - PF is shown on the Electrolux refrigerator display, indicator, or connected app - The published condition is: a power outage or surge was detected - The measured temperature condition does not match the operating range represented by PF - The important observation is when PF appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a power outage or surge was detected - PF identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Electrolux US refrigerators covered by the linked official error-code and alarm guide ## Verified diagnosis - Photograph the complete PF display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US refrigerators covered by the linked official error-code and alarm guide - Confirm that the observed condition matches the published meaning: a power outage or surge was detected - Published check — acknowledge the power-failure indication and check the refrigerator for a high-temperature alarm - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if PF remains, stop and move to exact-model diagnosis - Published check — If PF returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if PF remains, stop and move to exact-model diagnosis ## Evidence-backed actions - acknowledge the power-failure indication and check the refrigerator for a high-temperature alarm - If PF returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If PF returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. acknowledge the power-failure indication and check the refrigerator for a high-temperature alarm Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US refrigerator error-code and alarm guide - Source URL: https://owner.electrolux.com/support-articles/article/1847088-refrigerators-error-codes-and-alarms - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.