# Electrolux Wall oven C3 error Canonical page: https://getfixfault.com/guides/electrolux-wall-oven-c3 AI-readable URL: https://getfixfault.com/guides/electrolux-wall-oven-c3.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Wall oven C3: the oven door is open during pyrolysis. This interpretation applies to Electrolux UK ovens covered by the linked pyrolysis C-code support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Wall oven - Error code or indicator: C3 - Model scope: Electrolux UK ovens covered by the linked pyrolysis C-code support article - Region: United Kingdom / English ## What users may observe - C3 is shown on the Electrolux wall oven display, indicator, or connected app - The published condition is: the oven door is open during pyrolysis - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when C3 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the oven door is open during pyrolysis - C3 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to Electrolux UK ovens covered by the linked pyrolysis C-code support article ## Verified diagnosis - Photograph the complete C3 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK ovens covered by the linked pyrolysis C-code support article - Confirm that the observed condition matches the published meaning: the oven door is open during pyrolysis - Published check — close the oven door fully before activating pyrolysis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if C3 remains, stop and move to exact-model diagnosis - Published check — If C3 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if C3 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - close the oven door fully before activating pyrolysis - If C3 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If C3 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. close the oven door fully before activating pyrolysis Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK oven pyrolysis C-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/oven-displays-error-message-c1-c2-c3-c4 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.