# Electrolux Washing machine E10 error Canonical page: https://getfixfault.com/guides/electrolux-washing-machine-e10 AI-readable URL: https://getfixfault.com/guides/electrolux-washing-machine-e10.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Washing machine E10: a water-supply problem. This interpretation applies to Electrolux UK washing-machine and washer-dryer models covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Washing machine - Error code or indicator: E10 - Model scope: Electrolux UK washing-machine and washer-dryer models covered by the linked support article - Region: United Kingdom / English ## What users may observe - E10 is shown on the Electrolux washing machine display, indicator, or connected app - The published condition is: a water-supply problem - The affected fill stage does not receive or confirm the expected water supply while E10 is active - The important observation is when E10 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a water-supply problem - E10 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Electrolux UK washing-machine and washer-dryer models covered by the linked support article ## Verified diagnosis - Photograph the complete E10 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK washing-machine and washer-dryer models covered by the linked support article - Confirm that the observed condition matches the published meaning: a water-supply problem - Published check — check the household water supply, inlet hose, and accessible inlet filter - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if E10 remains, stop and move to exact-model diagnosis - Published check — If E10 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if E10 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - check the household water supply, inlet hose, and accessible inlet filter - If E10 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If E10 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. check the household water supply, inlet hose, and accessible inlet filter Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK washing-machine error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/washing-machine-displays-an-error-code-how-to-fix-it - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.