# Electrolux Washing machine E30 error Canonical page: https://getfixfault.com/guides/electrolux-washing-machine-e30 AI-readable URL: https://getfixfault.com/guides/electrolux-washing-machine-e30.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Washing machine E30: a water-pressure-sensor problem. This interpretation applies to Electrolux UK washing-machine and washer-dryer models covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Washing machine - Error code or indicator: E30 - Model scope: Electrolux UK washing-machine and washer-dryer models covered by the linked support article - Region: United Kingdom / English ## What users may observe - E30 is shown on the Electrolux washing machine display, indicator, or connected app - The published condition is: a water-pressure-sensor problem - The control cannot confirm the documented measured condition or sensor reference represented by E30 - The important observation is when E30 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a water-pressure-sensor problem - E30 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Electrolux UK washing-machine and washer-dryer models covered by the linked support article ## Verified diagnosis - Photograph the complete E30 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK washing-machine and washer-dryer models covered by the linked support article - Confirm that the observed condition matches the published meaning: a water-pressure-sensor problem - Published check — stop the washer, isolate power, and arrange authorised service if the code remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for E30 - Published check — Give service the E30 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for E30 ## Evidence-backed actions - stop the washer, isolate power, and arrange authorised service if the code remains - Give service the E30 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. stop the washer, isolate power, and arrange authorised service if the code remains Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK washing-machine error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/washing-machine-displays-an-error-code-how-to-fix-it - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.