# Electrolux Washing machine Eb0 error Canonical page: https://getfixfault.com/guides/electrolux-washing-machine-eb0 AI-readable URL: https://getfixfault.com/guides/electrolux-washing-machine-eb0.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Washing machine Eb0: the power supply voltage may be too low. This interpretation applies to Electrolux UK front-loader and top-loader washing machines covered by the linked low-voltage support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Washing machine - Error code or indicator: Eb0 - Model scope: Electrolux UK front-loader and top-loader washing machines covered by the linked low-voltage support article - Region: United Kingdom / English ## What users may observe - Eb0 is shown on the Electrolux washing machine display, indicator, or connected app - The published condition is: the power supply voltage may be too low - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when Eb0 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the power supply voltage may be too low - Eb0 does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to Electrolux UK front-loader and top-loader washing machines covered by the linked low-voltage support article ## Verified diagnosis - Photograph the complete Eb0 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK front-loader and top-loader washing machines covered by the linked low-voltage support article - Confirm that the observed condition matches the published meaning: the power supply voltage may be too low - Published check — remove any extension cable, use a grounded outlet, and arrange service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for Eb0 - Published check — Give service the Eb0 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for Eb0 ## Evidence-backed actions - remove any extension cable, use a grounded outlet, and arrange service if the code returns - Give service the Eb0 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. remove any extension cable, use a grounded outlet, and arrange service if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK washing-machine low-voltage support - Source URL: https://support.electrolux.co.uk/support-articles/article/washing-machine-displays-error-message-eb0-ebo-or-emits-11-beeps--11-flashes - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.