# Electrolux Washing machine HO SE error Canonical page: https://getfixfault.com/guides/electrolux-washing-machine-ho-se AI-readable URL: https://getfixfault.com/guides/electrolux-washing-machine-ho-se.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Washing machine HO SE: the hot and cold inlet hoses are reversed. This interpretation applies to Electrolux US front-loading laundry washers covered by the linked official support entry in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Washing machine - Error code or indicator: HO SE - Model scope: Electrolux US front-loading laundry washers covered by the linked official support entry - Region: United States / English ## What users may observe - HO SE is shown on the Electrolux washing machine display, indicator, or connected app - The published condition is: the hot and cold inlet hoses are reversed - The affected fill stage does not receive or confirm the expected water supply while HO SE is active - The important observation is when HO SE appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the hot and cold inlet hoses are reversed - HO SE does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Electrolux US front-loading laundry washers covered by the linked official support entry ## Verified diagnosis - Photograph the complete HO SE display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US front-loading laundry washers covered by the linked official support entry - Confirm that the observed condition matches the published meaning: the hot and cold inlet hoses are reversed - Published check — turn off both water supplies and reconnect the visible hoses to the correct hot and cold inlets - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if HO SE remains, stop and move to exact-model diagnosis - Published check — If HO SE returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if HO SE remains, stop and move to exact-model diagnosis ## Evidence-backed actions - turn off both water supplies and reconnect the visible hoses to the correct hot and cold inlets - If HO SE returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If HO SE returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. turn off both water supplies and reconnect the visible hoses to the correct hot and cold inlets Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US front-load washer error-code support - Source URL: https://owner.electrolux.com/support-articles/article/1829275-laundry-front-loading-washer-displaying-error-code-ho-se-reversed-hose-detection- - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.