# GE Appliances Dishwasher C3 error Canonical page: https://getfixfault.com/guides/ge-appliances-dishwasher-c3-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-dishwasher-c3-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Dishwasher C3: the dishwasher will not drain. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Dishwasher - Error code or indicator: C3 - Model scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Region: United States / English ## What users may observe - C3 is shown on the GE Appliances dishwasher display, indicator, or connected app - The published condition is: the dishwasher will not drain - Water or condensate does not leave through the documented drain path as expected while C3 is active - The important observation is when C3 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the dishwasher will not drain - C3 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model ## Verified diagnosis - Photograph the complete C3 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Confirm that the observed condition matches the published meaning: the dishwasher will not drain - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article - not every code appears on every model - Published check — Disconnect power at the breaker for about 30 seconds, reset the dishwasher, and contact service if C3 remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for C3 - Published check — Give service the C3 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for C3 ## Evidence-backed actions - Disconnect power at the breaker for about 30 seconds, reset the dishwasher, and contact service if C3 remains - Give service the C3 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Disconnect power at the breaker for about 30 seconds, reset the dishwasher, and contact service if C3 remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances dishwasher error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.