# GE Appliances Dishwasher C4 error Canonical page: https://getfixfault.com/guides/ge-appliances-dishwasher-c4-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-dishwasher-c4-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Dishwasher C4: the machine filled twice or its float, drain, or sump is restricted. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Dishwasher - Error code or indicator: C4 - Model scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Region: United States / English ## What users may observe - C4 is shown on the GE Appliances dishwasher display, indicator, or connected app - The published condition is: the machine filled twice or its float, drain, or sump is restricted - Water or condensate does not leave through the documented drain path as expected while C4 is active - The important observation is when C4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the machine filled twice or its float, drain, or sump is restricted - C4 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model ## Verified diagnosis - Photograph the complete C4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Confirm that the observed condition matches the published meaning: the machine filled twice or its float, drain, or sump is restricted - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article - not every code appears on every model - Published check — Isolate power, check the float cover and accessible sump for debris, then run one controlled test - Published check — contact service if C4 returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for C4 - Published check — Give service the C4 photo, full model and serial number, when it appeared, and the result of every published external check ## Evidence-backed actions - Isolate power, check the float cover and accessible sump for debris, then run one controlled test - contact service if C4 returns - Give service the C4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate power, check the float cover and accessible sump for debris, then run one controlled test; contact service if C4 returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances dishwasher error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.