# GE Appliances Dishwasher C6 error Canonical page: https://getfixfault.com/guides/ge-appliances-dishwasher-c6-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-dishwasher-c6-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Dishwasher C6: incoming water temperature is too low. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Dishwasher - Error code or indicator: C6 - Model scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Region: United States / English ## What users may observe - C6 is shown on the GE Appliances dishwasher display, indicator, or connected app - The published condition is: incoming water temperature is too low - The controls show the documented lock, pause, or setting state until the exact published control action is completed - If operation no longer matches that description, record the new symptom instead of treating the normal C6 state as the diagnosis ## Causes or fault boundaries - Manufacturer-defined fault area — incoming water temperature is too low - C6 does not prove a failed control board while the documented control state is active - Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model ## Verified diagnosis - Photograph the complete C6 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Confirm that the observed condition matches the published meaning: incoming water temperature is too low - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article - not every code appears on every model - Published check — Check the incoming hot-water setting safely, run the nearby faucet before one cycle, and contact service if C6 remains - Treat C6 as normal only while the observed operation matches “incoming water temperature is too low” - a different symptom needs separate diagnosis - Published check — No component repair is indicated while C6 remains the documented status “incoming water temperature is too low” - Treat C6 as normal only while the observed operation matches “incoming water temperature is too low”; a different symptom needs separate diagnosis ## Evidence-backed actions - Check the incoming hot-water setting safely, run the nearby faucet before one cycle, and contact service if C6 remains - No component repair is indicated while C6 remains the documented status “incoming water temperature is too low” ## Safety boundary Check the incoming hot-water setting safely, run the nearby faucet before one cycle, and contact service if C6 remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances dishwasher error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.