# GE Appliances Dishwasher C7 error Canonical page: https://getfixfault.com/guides/ge-appliances-dishwasher-c7-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-dishwasher-c7-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Dishwasher C7: the water-temperature sensor circuit is inoperative. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Dishwasher - Error code or indicator: C7 - Model scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Region: United States / English ## What users may observe - C7 is shown on the GE Appliances dishwasher display, indicator, or connected app - The published condition is: the water-temperature sensor circuit is inoperative - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when C7 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the water-temperature sensor circuit is inoperative - C7 does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model ## Verified diagnosis - Photograph the complete C7 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Confirm that the observed condition matches the published meaning: the water-temperature sensor circuit is inoperative - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article - not every code appears on every model - Published check — Disconnect power at the breaker for about 30 seconds, reset once, and contact service if C7 returns - Published check — do not open the sensor circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for C7 - Published check — Give service the C7 photo, full model and serial number, when it appeared, and the result of every published external check ## Evidence-backed actions - Disconnect power at the breaker for about 30 seconds, reset once, and contact service if C7 returns - do not open the sensor circuit - Give service the C7 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Disconnect power at the breaker for about 30 seconds, reset once, and contact service if C7 returns; do not open the sensor circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances dishwasher error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.