# GE Appliances Dishwasher LEAK DETECTED error Canonical page: https://getfixfault.com/guides/ge-appliances-dishwasher-leak-detected-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-dishwasher-leak-detected-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Dishwasher LEAK DETECTED: the leak-detection system has detected a possible leak. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Dishwasher - Error code or indicator: LEAK DETECTED - Model scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Region: United States / English ## What users may observe - LEAK DETECTED is shown on the GE Appliances dishwasher display, indicator, or connected app - The published condition is: the leak-detection system has detected a possible leak - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when LEAK DETECTED appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the leak-detection system has detected a possible leak - LEAK DETECTED confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model ## Verified diagnosis - Photograph the complete LEAK DETECTED display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model - Confirm that the observed condition matches the published meaning: the leak-detection system has detected a possible leak - Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article - not every code appears on every model - Published check — Stop the cycle, close the water supply if water is present, isolate power when safe, and contact service - Published check — do not run another cycle while the warning remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for LEAK DETECTED - Published check — Give service the LEAK DETECTED photo, full model and serial number, when it appeared, and the result of every published external check ## Evidence-backed actions - Stop the cycle, close the water supply if water is present, isolate power when safe, and contact service - do not run another cycle while the warning remains - Give service the LEAK DETECTED photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop the cycle, close the water supply if water is present, isolate power when safe, and contact service; do not run another cycle while the warning remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances dishwasher error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.