# GE Appliances Oven F4 error Canonical page: https://getfixfault.com/guides/ge-appliances-v2-oven-f4-advantium-120v-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-v2-oven-f4-advantium-120v-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Oven F4: the humidity sensor is open or shorted. This interpretation applies to GE Advantium 120-volt oven models covered by the official article in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Oven - Error code or indicator: F4 - Model scope: GE Advantium 120-volt oven models covered by the official article - Region: United States / English ## What users may observe - F4 is shown on the GE Appliances oven display, indicator, or connected app - The published condition is: the humidity sensor is open or shorted - The control cannot confirm the documented measured condition or sensor reference represented by F4 - The important observation is when F4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the humidity sensor is open or shorted - F4 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to GE Advantium 120-volt oven models covered by the official article ## Verified diagnosis - Photograph the complete F4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Advantium 120-volt oven models covered by the official article - Confirm that the observed condition matches the published meaning: the humidity sensor is open or shorted - Published check — Press CLEAR/OFF or CANCEL, program the control again, and run the selected cooking function once - Published check — if F4 returns, disconnect power safely and arrange trained service without opening the oven - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for F4 - Published check — Give service the F4 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for F4 ## Evidence-backed actions - Press CLEAR/OFF or CANCEL, program the control again, and run the selected cooking function once - if F4 returns, disconnect power safely and arrange trained service without opening the oven - Give service the F4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Press CLEAR/OFF or CANCEL, program the control again, and run the selected cooking function once; if F4 returns, disconnect power safely and arrange trained service without opening the oven. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances Advantium 120-volt oven fault-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16301 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.