# GE Appliances Washing machine Spin or both Spin & Rinse lights blinking error Canonical page: https://getfixfault.com/guides/ge-appliances-v2-washing-machine-spin-or-both-spin-rinse-lights-blinking-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-v2-washing-machine-spin-or-both-spin-rinse-lights-blinking-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Washing machine Spin or both Spin & Rinse lights blinking: the washer detected an unbalanced load. This interpretation applies to GE Appliances washers with 2017-and-newer electronic Consumer Help Indicator controls in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Washing machine - Error code or indicator: Spin or both Spin & Rinse lights blinking - Model scope: GE Appliances washers with 2017-and-newer electronic Consumer Help Indicator controls - Region: United States / English ## What users may observe - Spin or both Spin & Rinse lights blinking is shown on the GE Appliances washing machine display, indicator, or connected app - The published condition is: the washer detected an unbalanced load - Water or condensate does not leave through the documented drain path as expected while Spin or both Spin & Rinse lights blinking is active - The important observation is when Spin or both Spin & Rinse lights blinking appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the washer detected an unbalanced load - Spin or both Spin & Rinse lights blinking does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to GE Appliances washers with 2017-and-newer electronic Consumer Help Indicator controls ## Verified diagnosis - Photograph the complete Spin or both Spin & Rinse lights blinking display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances washers with 2017-and-newer electronic Consumer Help Indicator controls - Confirm that the observed condition matches the published meaning: the washer detected an unbalanced load - Published check — Redistribute the load evenly and run one Drain & Spin or Spin cycle - Published check — arrange service if the condition repeats with balanced loads - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for Spin or both Spin & Rinse lights blinking - Published check — Give service the Spin or both Spin & Rinse lights blinking photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for Spin or both Spin & Rinse lights blinking ## Evidence-backed actions - Redistribute the load evenly and run one Drain & Spin or Spin cycle - arrange service if the condition repeats with balanced loads - Give service the Spin or both Spin & Rinse lights blinking photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Redistribute the load evenly and run one Drain & Spin or Spin cycle; arrange service if the condition repeats with balanced loads. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances washer Consumer Help Indicator support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=35949 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.