# GE Appliances Water heater F73 error Canonical page: https://getfixfault.com/guides/ge-appliances-v2-water-heater-f73-official-code AI-readable URL: https://getfixfault.com/guides/ge-appliances-v2-water-heater-f73-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Water heater F73: the condensate drain-pan port is clogged. This interpretation applies to GE Profile GEOSPRING hybrid heat-pump water heaters made June 2025 onward in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Water heater - Error code or indicator: F73 - Model scope: GE Profile GEOSPRING hybrid heat-pump water heaters made June 2025 onward - Region: United States / English ## What users may observe - F73 is shown on the GE Appliances water heater display, indicator, or connected app - The published condition is: the condensate drain-pan port is clogged - Water or condensate does not leave through the documented drain path as expected while F73 is active - The important observation is when F73 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the condensate drain-pan port is clogged - F73 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to GE Profile GEOSPRING hybrid heat-pump water heaters made June 2025 onward ## Verified diagnosis - Photograph the complete F73 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Profile GEOSPRING hybrid heat-pump water heaters made June 2025 onward - Confirm that the observed condition matches the published meaning: the condensate drain-pan port is clogged - Published check — Clean the condensate-drain obstruction only as the GEOSPRING manual permits - Published check — arrange service if F73 returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for F73 - Published check — Give service the F73 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for F73 ## Evidence-backed actions - Clean the condensate-drain obstruction only as the GEOSPRING manual permits - arrange service if F73 returns - Give service the F73 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Clean the condensate-drain obstruction only as the GEOSPRING manual permits; arrange service if F73 returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances GEOSPRING water-heater fault-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=18020 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.