# GE Appliances Washer/dryer combo 353 / F353 error Canonical page: https://getfixfault.com/guides/ge-profile-combo-washer-dryer-combo-353-f353-official-code AI-readable URL: https://getfixfault.com/guides/ge-profile-combo-washer-dryer-combo-353-f353-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Washer/dryer combo 353 / F353: the lint filter is clogged with residue. This interpretation applies to GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Washer/dryer combo - Error code or indicator: 353 / F353 - Model scope: GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article - Region: United States / English ## What users may observe - 353 / F353 is shown on the GE Appliances washer/dryer combo display, indicator, or connected app - The published condition is: the lint filter is clogged with residue - Airflow through the documented filter or vent path is restricted or the maintenance condition remains active - The important observation is when 353 / F353 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the lint filter is clogged with residue - 353 / F353 does not by itself prove a fan, heater, sensor, or control failure before the accessible airflow path is checked - Model boundary — apply this interpretation only to GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article ## Verified diagnosis - Photograph the complete 353 / F353 display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article - Confirm that the observed condition matches the published meaning: the lint filter is clogged with residue - Published check — Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test - Published check — contact service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for 353 / F353 - Published check — Give service the 353 / F353 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for 353 / F353 ## Evidence-backed actions - Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test - contact service if the code returns - Give service the 353 / F353 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test; contact service if the code returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Profile UltraFast Combo washer/dryer fault-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=000063878 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.