# GE Appliances Range FC error Canonical page: https://getfixfault.com/guides/ge-range-range-fc-official-code AI-readable URL: https://getfixfault.com/guides/ge-range-range-fc-official-code.txt Last reviewed: 2026-08-18 ## Direct answer GE Appliances Range FC: a range door-lock circuit failure. This interpretation applies to GE Appliances range models covered by the official Range & Wall Oven fault-code article in United States / English. ## Exact scope - Brand: GE Appliances - Appliance: Range - Error code or indicator: FC - Model scope: GE Appliances range models covered by the official Range & Wall Oven fault-code article - Region: United States / English ## What users may observe - FC is shown on the GE Appliances range display, indicator, or connected app - The published condition is: a range door-lock circuit failure - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when FC appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a range door-lock circuit failure - FC does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to GE Appliances range models covered by the official Range & Wall Oven fault-code article ## Verified diagnosis - Photograph the complete FC display before changing controls or removing power - Confirm that the full model number is covered by this scope: GE Appliances range models covered by the official Range & Wall Oven fault-code article - Confirm that the observed condition matches the published meaning: a range door-lock circuit failure - Published check — Turn the range off at the breaker and arrange trained service - Published check — GE associates FC with the door-lock circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that GE Appliances does not specify for FC - Published check — Give service the FC photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for FC ## Evidence-backed actions - Turn the range off at the breaker and arrange trained service - GE associates FC with the door-lock circuit - Give service the FC photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Turn the range off at the breaker and arrange trained service; GE associates FC with the door-lock circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: GE Appliances range and wall-oven error-code support - Source URL: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16238 - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.