# Gorenje dishwasher F12 error Canonical page: https://getfixfault.com/guides/gorenje-dishwasher-f12-code AI-readable URL: https://getfixfault.com/guides/gorenje-dishwasher-f12-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dishwasher F12: The dishwasher is not receiving water correctly. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dishwasher - Error code or indicator: F12 - Model scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Region: Europe / English manual ## What users may observe - F12 appears during filling - The dishwasher does not receive enough water to continue - The programme stops soon after starting ## Causes or fault boundaries - The water tap is closed or supply is interrupted - The external inlet-hose filter is blocked - A kinked inlet hose or internal inlet fault ## Verified diagnosis - Photograph the complete F12 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Confirm that the observed condition matches the published meaning: The dishwasher is not receiving water correctly - Confirm F12 and record the exact model - Turn off the water tap and unplug the dishwasher - Check the household tap and visible inlet hose for a kink or leak - Unscrew the inlet hose only with the tap closed and clean its external filter as the manual shows - Reconnect, reopen the tap, check for leaks, and test once - Published check — Correct a closed tap or visible hose restriction and clean the external inlet filter - Published check — If F12 returns with a good supply, use service rather than selecting an inlet valve from the code alone ## Evidence-backed actions - Correct a closed tap or visible hose restriction and clean the external inlet filter - If F12 returns with a good supply, use service rather than selecting an inlet valve from the code alone - If F12 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Close the water tap and unplug the dishwasher before unscrewing the inlet hose or cleaning its external filter. Check every reconnection for leaks. ## Primary evidence - Source: Gorenje official dishwasher manual 875524en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875524en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.