# Gorenje dishwasher F41 error Canonical page: https://getfixfault.com/guides/gorenje-dishwasher-f41-code AI-readable URL: https://getfixfault.com/guides/gorenje-dishwasher-f41-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dishwasher F41: The dishwasher heater has reported a fault. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dishwasher - Error code or indicator: F41 - Model scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Region: Europe / English manual ## What users may observe - F41 appears during a wash programme - Water may not heat normally - The dishwasher stops or finishes with poor cleaning or drying ## Causes or fault boundaries - A heater fault - A temperature-sensing or control fault - A wiring or insulation problem requiring professional testing ## Verified diagnosis - Photograph the complete F41 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Confirm that the observed condition matches the published meaning: The dishwasher heater has reported a fault - Confirm F41 and record the exact model - Stop the programme and close the water tap - Unplug the dishwasher and allow it to cool - Record whether water remained cold or the programme stopped early - Arrange qualified service for heater and insulation testing - Published check — Gorenje identifies F41 as heater fault 1 and directs the user to service - Published check — No safe model-independent heater replacement is verified ## Evidence-backed actions - Gorenje identifies F41 as heater fault 1 and directs the user to service - No safe model-independent heater replacement is verified - Give service the F41 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Turn off the water tap and unplug the dishwasher before service access. Do not test or bypass the heater, thermostat, or mains wiring. ## Primary evidence - Source: Gorenje official dishwasher manual 875524en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875524en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.