# Gorenje dishwasher F52 error Canonical page: https://getfixfault.com/guides/gorenje-dishwasher-f52-code AI-readable URL: https://getfixfault.com/guides/gorenje-dishwasher-f52-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dishwasher F52: The dishwasher has detected an abnormal water level. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dishwasher - Error code or indicator: F52 - Model scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Region: Europe / English manual ## What users may observe - F52 appears during filling or washing - The water level may be too low or too high - The dishwasher may stop before completing the cycle ## Causes or fault boundaries - Dirty coarse or fine filters - A blocked external inlet-hose filter - A water-level sensor or fill fault requiring diagnosis ## Verified diagnosis - Photograph the complete F52 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Confirm that the observed condition matches the published meaning: The dishwasher has detected an abnormal water level - Confirm F52 and isolate power - Remove and clean the coarse and fine filters - Close the water tap before touching the inlet hose - Inspect and clean the external inlet-hose filter as the Gorenje manual shows - Refit parts, reopen the tap, and test once - arrange service if the water-level code returns - Published check — Clean the accessible filters and correct only visible inlet restrictions ## Evidence-backed actions - Clean the accessible filters and correct only visible inlet restrictions - F52 can still require level-sensor or fill diagnosis - do not replace those parts from the code alone - If F52 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Unplug the dishwasher before removing filters and close the water tap before touching the inlet hose. Stop if the tub is overfilling or leaking. ## Primary evidence - Source: Gorenje official dishwasher manual 875524en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875524en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.