# Gorenje dishwasher F54 error Canonical page: https://getfixfault.com/guides/gorenje-dishwasher-f54-code AI-readable URL: https://getfixfault.com/guides/gorenje-dishwasher-f54-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dishwasher F54: The dishwasher is overfilling. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dishwasher - Error code or indicator: F54 - Model scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Region: Europe / English manual ## What users may observe - F54 appears while the dishwasher is filling - Water may rise above the normal tub level - The appliance may pump continuously or show water around the base ## Causes or fault boundaries - An overfill condition in the water-level system - An inlet valve that does not close - A leak or sensor fault requiring service ## Verified diagnosis - Photograph the complete F54 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Confirm that the observed condition matches the published meaning: The dishwasher is overfilling - Confirm F54 and watch for active filling - Close the water tap before unplugging the dishwasher - Keep the appliance isolated from standing water - Record whether water continued entering after the programme stopped - Arrange qualified service and do not perform another test cycle - Published check — Gorenje's F54 boundary is an overfill stop-and-service procedure - Published check — The manual specifically requires the tap to be off before unplugging ## Evidence-backed actions - Gorenje's F54 boundary is an overfill stop-and-service procedure - The manual specifically requires the tap to be off before unplugging - do not attempt inlet-valve or level-sensor repair - Give service the F54 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Turn off the water tap before unplugging the dishwasher, as Gorenje warns against unplugging first while the tap remains open. Do not run another cycle. ## Primary evidence - Source: Gorenje official dishwasher manual 875524en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875524en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.