# Gorenje dishwasher F67 error Canonical page: https://getfixfault.com/guides/gorenje-dishwasher-f67-code AI-readable URL: https://getfixfault.com/guides/gorenje-dishwasher-f67-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dishwasher F67: The dishwasher has detected a water-inlet problem. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dishwasher - Error code or indicator: F67 - Model scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Region: Europe / English manual ## What users may observe - F67 appears during filling - The programme does not receive the expected water - The code returns after a tap or filter check ## Causes or fault boundaries - The tap is closed or supply pressure is interrupted - The external inlet-hose filter is blocked - A fill valve, hose, or control fault ## Verified diagnosis - Photograph the complete F67 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en - Confirm that the observed condition matches the published meaning: The dishwasher has detected a water-inlet problem - Confirm F67 and record the exact model - Close the water tap and unplug the dishwasher - Check the tap and visible inlet hose for a kink or leak - Clean the external inlet-hose filter as the manual shows - Reconnect, reopen the tap, check for watertightness, and test once - Published check — Correct a closed tap or visible inlet restriction and clean the external filter - Published check — A recurring F67 needs service ## Evidence-backed actions - Correct a closed tap or visible inlet restriction and clean the external filter - A recurring F67 needs service - do not select a valve or control part from the code alone - If F67 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Close the water tap and unplug the dishwasher before touching the inlet hose or filter. Check the connection for leaks before one controlled test. ## Primary evidence - Source: Gorenje official dishwasher manual 875524en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875524en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.