# Gorenje Dryer E01 error Canonical page: https://getfixfault.com/guides/gorenje-dryer-e01-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-dryer-e01-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Dryer E01: a tumble-dryer temperature-sensor failure. This interpretation applies to Gorenje tumble-dryer models covered by official manual 923904en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E01 - Model scope: Gorenje tumble-dryer models covered by official manual 923904en - Region: Europe / English manual ## What users may observe - E01 is shown on the Gorenje dryer display, indicator, or connected app - The published condition is: a tumble-dryer temperature-sensor failure - The control cannot confirm the documented measured condition or sensor reference represented by E01 - The important observation is when E01 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a tumble-dryer temperature-sensor failure - E01 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Gorenje tumble-dryer models covered by official manual 923904en ## Verified diagnosis - Photograph the complete E01 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 923904en - Confirm that the observed condition matches the published meaning: a tumble-dryer temperature-sensor failure - Published check — Stop the dryer and contact an authorised Gorenje service centre - Published check — do not open or test the sensor circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for E01 - Published check — Give service the E01 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for E01 ## Evidence-backed actions - Stop the dryer and contact an authorised Gorenje service centre - do not open or test the sensor circuit - Give service the E01 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop the dryer and contact an authorised Gorenje service centre; do not open or test the sensor circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official tumble-dryer manual 923904en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/923904en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.