# Gorenje Refrigerator C1 error Canonical page: https://getfixfault.com/guides/gorenje-refrigerator-c1-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-refrigerator-c1-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Refrigerator C1: a freezer-compartment door-open or door-sensor condition. This interpretation applies to Gorenje refrigerator models covered by official manual 954523en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Refrigerator - Error code or indicator: C1 - Model scope: Gorenje refrigerator models covered by official manual 954523en - Region: Europe / English manual ## What users may observe - C1 is shown on the Gorenje refrigerator display, indicator, or connected app - The published condition is: a freezer-compartment door-open or door-sensor condition - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when C1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a freezer-compartment door-open or door-sensor condition - C1 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to Gorenje refrigerator models covered by official manual 954523en ## Verified diagnosis - Photograph the complete C1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje refrigerator models covered by official manual 954523en - Confirm that the observed condition matches the published meaning: a freezer-compartment door-open or door-sensor condition - Published check — Close the freezer door and allow the alarm to clear - Published check — contact service if C1 remains with the door closed - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for C1 - Published check — Give service the C1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for C1 ## Evidence-backed actions - Close the freezer door and allow the alarm to clear - contact service if C1 remains with the door closed - Give service the C1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Close the freezer door and allow the alarm to clear; contact service if C1 remains with the door closed. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official refrigerator manual 954523en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/954523en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.