# Gorenje Refrigerator E1 error Canonical page: https://getfixfault.com/guides/gorenje-refrigerator-e1-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-refrigerator-e1-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Refrigerator E1: a refrigerator-compartment temperature-sensor defect. This interpretation applies to Gorenje refrigerator models covered by official manual 954523en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Refrigerator - Error code or indicator: E1 - Model scope: Gorenje refrigerator models covered by official manual 954523en - Region: Europe / English manual ## What users may observe - E1 is shown on the Gorenje refrigerator display, indicator, or connected app - The published condition is: a refrigerator-compartment temperature-sensor defect - The control cannot confirm the documented measured condition or sensor reference represented by E1 - The important observation is when E1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a refrigerator-compartment temperature-sensor defect - E1 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Gorenje refrigerator models covered by official manual 954523en ## Verified diagnosis - Photograph the complete E1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje refrigerator models covered by official manual 954523en - Confirm that the observed condition matches the published meaning: a refrigerator-compartment temperature-sensor defect - Published check — Record E1 and the full model number, then contact an authorised Gorenje service centre - Published check — do not test the sensor circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for E1 - Published check — Give service the E1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for E1 ## Evidence-backed actions - Record E1 and the full model number, then contact an authorised Gorenje service centre - do not test the sensor circuit - Give service the E1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Record E1 and the full model number, then contact an authorised Gorenje service centre; do not test the sensor circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official refrigerator manual 954523en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/954523en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.