# Gorenje Refrigerator F1 error Canonical page: https://getfixfault.com/guides/gorenje-refrigerator-f1-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-refrigerator-f1-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Refrigerator F1: a freezer-compartment fan malfunction. This interpretation applies to Gorenje refrigerator models covered by official manual 951509en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Refrigerator - Error code or indicator: F1 - Model scope: Gorenje refrigerator models covered by official manual 951509en - Region: Europe / English manual ## What users may observe - F1 is shown on the Gorenje refrigerator display, indicator, or connected app - The published condition is: a freezer-compartment fan malfunction - The documented fan or circulation function is not confirmed while F1 is active - The important observation is when F1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a freezer-compartment fan malfunction - F1 identifies the circulation path but does not alone prove the fan motor, obstruction, wiring, sensor, or control failed - Model boundary — apply this interpretation only to Gorenje refrigerator models covered by official manual 951509en ## Verified diagnosis - Photograph the complete F1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje refrigerator models covered by official manual 951509en - Confirm that the observed condition matches the published meaning: a freezer-compartment fan malfunction - Published check — Transfer food to a safe cold place, switch the refrigerator off, and contact an authorised Gorenje service centre - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for F1 - Published check — Give service the F1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for F1 ## Evidence-backed actions - Transfer food to a safe cold place, switch the refrigerator off, and contact an authorised Gorenje service centre - Give service the F1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Transfer food to a safe cold place, switch the refrigerator off, and contact an authorised Gorenje service centre. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official refrigerator manual 951509en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/951509en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.