# Gorenje tumble dryer E00 error Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-e00-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-e00-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer E00: The dryer control unit has reported a failure. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E00 - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - E00 appears on the dryer display - The programme may not start or may stop unexpectedly - The code returns after the appliance is powered again ## Causes or fault boundaries - A control-unit fault - Power or communication damage affecting the control system - A model-specific electronic failure ## Verified diagnosis - Photograph the complete E00 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The dryer control unit has reported a failure - Confirm E00 and record the exact model and serial number - Stop the programme and disconnect power if the dryer behaves abnormally - Do not open the control area or test live circuits - Note whether the display, buttons, or programme control also malfunction - Arrange qualified Gorenje service with the complete code - Published check — Gorenje identifies E00 as a control-unit failure - Published check — There is no verified model-independent user repair ## Evidence-backed actions - Gorenje identifies E00 as a control-unit failure - There is no verified model-independent user repair - keep the dryer isolated and let service identify the control, wiring, or supply fault - Give service the E00 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop using the dryer and isolate power if it behaves abnormally. Do not remove covers, probe live circuits, or replace the control unit from E00 alone. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.