# Gorenje tumble dryer E02 error Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-e02-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-e02-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer E02: The dryer has detected a communication error. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E02 - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - E02 appears during operation - The programme may stop or fail to start - The error returns after one controlled power restore ## Causes or fault boundaries - A communication link between dryer control components - A connector or wiring fault - A control-unit problem requiring diagnosis ## Verified diagnosis - Photograph the complete E02 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The dryer has detected a communication error - Confirm E02 and record the exact model and serial number - Stop the dryer and disconnect power after the drum and surfaces cool - Note whether the programme stopped, failed to start, or lost display functions - Do not remove covers or test live wiring - Arrange qualified Gorenje service if E02 returns - Published check — Gorenje identifies E02 as a communication error - Published check — No universal connector or board repair is verified ## Evidence-backed actions - Gorenje identifies E02 as a communication error - No universal connector or board repair is verified - service must identify the model-specific communication path - If E02 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Disconnect power before any external inspection and do not open fixed panels or test live wiring. Arrange service if E02 returns. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.