# Gorenje tumble dryer E07 / E08 error Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-e07-e08-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-e07-e08-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer E07 / E08: The dryer control unit has reported a failure. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E07 / E08 - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - E07 or E08 appears on the display - The dryer may stop, fail to start, or lose programme control - The code returns after power is restored ## Causes or fault boundaries - A control-unit failure - Internal wiring or communication damage - A model-specific electronic fault ## Verified diagnosis - Photograph the complete E07 / E08 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The dryer control unit has reported a failure - Confirm E07 or E08 and record the exact model - Stop the programme and let the dryer cool - Disconnect the dryer from power as Gorenje directs - Record whether the code returns immediately or after a start attempt - Arrange qualified service with the code and serial number - Published check — Gorenje groups E07/E08 as control-unit failures and directs power disconnection - Published check — No internal user repair is verified ## Evidence-backed actions - Gorenje groups E07/E08 as control-unit failures and directs power disconnection - No internal user repair is verified - keep the dryer isolated and use qualified service - Give service the E07 / E08 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Disconnect the cooled dryer from power as Gorenje directs. Do not remove covers, bypass controls, or keep operating it with E07/E08 displayed. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.