# Gorenje tumble dryer E11 error Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-e11-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-e11-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer E11: The BLDC motor and control unit are not communicating. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E11 - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - E11 appears during a drying programme - The drum may stop or fail to rotate - The code returns after power is restored ## Causes or fault boundaries - A BLDC motor communication fault - Motor wiring or connector damage - A motor or control-unit fault requiring diagnosis ## Verified diagnosis - Photograph the complete E11 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The BLDC motor and control unit are not communicating - Confirm E11 and record the exact model and serial number - Stop the programme and wait until the drum is fully stopped - Let hot surfaces cool, then disconnect power - Note whether the drum failed to rotate or stopped under load - Arrange qualified service for the BLDC motor communication diagnosis - Published check — Gorenje identifies E11 as a BLDC motor communication error - Published check — No user motor, harness, or control replacement is verified ## Evidence-backed actions - Gorenje identifies E11 as a BLDC motor communication error - No user motor, harness, or control replacement is verified - service must test the exact drive system - If E11 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Stop the dryer and disconnect power after it has cooled. Do not reach into a moving drum, remove covers, or test the motor circuit without qualified training. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.