# Gorenje tumble dryer E91 / E92 / E93 error Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-e91-e92-e93-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-e91-e92-e93-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer E91 / E92 / E93: The dryer has detected a temperature-sensor failure. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: E91 / E92 / E93 - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - E91, E92, or E93 appears during or after drying - The programme may stop or refuse to heat normally - The same code returns after a restart ## Causes or fault boundaries - A failed temperature sensor - Sensor wiring or connection damage - A control fault requiring model-specific diagnosis ## Verified diagnosis - Photograph the complete E91 / E92 / E93 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The dryer has detected a temperature-sensor failure - Confirm E91, E92, or E93 and record the exact model - Stop the programme and let the dryer and laundry cool - Disconnect power after cooling - Record whether the code appears immediately or only during heating - Arrange qualified Gorenje service and provide the code, model, and serial number - Published check — Gorenje identifies E91/E92/E93 as temperature-sensor failures and does not publish a user sensor replacement - Published check — Keep the dryer isolated and use qualified service for sensor, wiring, and control diagnosis ## Evidence-backed actions - Gorenje identifies E91/E92/E93 as temperature-sensor failures and does not publish a user sensor replacement - Keep the dryer isolated and use qualified service for sensor, wiring, and control diagnosis - If E91 / E92 / E93 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Stop the dryer and disconnect it from power after the drum and surfaces have cooled. Do not open the heater or sensor circuit or run repeated heated cycles. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.