# Gorenje tumble dryer PF warning Canonical page: https://getfixfault.com/guides/gorenje-tumble-dryer-pf-code AI-readable URL: https://getfixfault.com/guides/gorenje-tumble-dryer-pf-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Dryer PF: The drying cycle was interrupted by a power failure. This interpretation applies to Gorenje tumble-dryer models covered by official manual 964250en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Dryer - Error code or indicator: PF - Model scope: Gorenje tumble-dryer models covered by official manual 964250en - Region: Europe / English manual ## What users may observe - PF appears after the dryer loses power - The drying programme is interrupted - The cycle may resume when Start/Pause is pressed ## Causes or fault boundaries - A household power interruption - A loose or overloaded supply connection - An intermittent supply fault outside the dryer ## Verified diagnosis - Photograph the complete PF display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje tumble-dryer models covered by official manual 964250en - Confirm that the observed condition matches the published meaning: The drying cycle was interrupted by a power failure - Confirm PF and record the exact dryer model - Check whether the household power was interrupted and whether other appliances lost power - Wait until the dryer is safe to operate, then press Start/Pause once as Gorenje directs - Observe one controlled resume and stop if there is heat damage, smell, arcing, or another trip - Arrange qualified electrical or appliance service if PF returns without a known supply interruption - Published check — Resume the interrupted cycle once with Start/Pause - Published check — If the warning recurs, have the household supply and dryer connection checked ## Evidence-backed actions - Resume the interrupted cycle once with Start/Pause - If the warning recurs, have the household supply and dryer connection checked - PF alone does not justify opening the dryer or replacing a part - No component repair is indicated while PF remains the documented status “The drying cycle was interrupted by a power failure” ## Safety boundary Do not inspect live wiring or continue if there is a burning smell, heat damage, arcing, or a tripped protective device. Use a qualified electrician or appliance service for recurring supply faults. ## Primary evidence - Source: Gorenje official tumble-dryer manual 964250en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964250en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.