# Gorenje Washing machine E_CLF error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e-clf-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e-clf-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Washing machine E_CLF: a reduced-flow washing-machine drain-system alert. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E_CLF - Model scope: Gorenje washing-machine models covered by official manual 904001en - Region: Europe / English manual ## What users may observe - E_CLF is shown on the Gorenje washing machine display, indicator, or connected app - The published condition is: a reduced-flow washing-machine drain-system alert - Water or condensate does not leave through the documented drain path as expected while E_CLF is active - The important observation is when E_CLF appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a reduced-flow washing-machine drain-system alert - E_CLF does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Gorenje washing-machine models covered by official manual 904001en ## Verified diagnosis - Photograph the complete E_CLF display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en - Confirm that the observed condition matches the published meaning: a reduced-flow washing-machine drain-system alert - Published check — With power isolated, clean the pump filter and inspect the drain hose and household drain - Published check — contact service if E_CLF returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for E_CLF - Published check — Give service the E_CLF photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for E_CLF ## Evidence-backed actions - With power isolated, clean the pump filter and inspect the drain hose and household drain - contact service if E_CLF returns - Give service the E_CLF photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. With power isolated, clean the pump filter and inspect the drain hose and household drain; contact service if E_CLF returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official washing-machine manual 904001en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/904001en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.