# Gorenje washing machine E:02 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e02-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e02-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E:02: The washing machine cannot confirm that the door is locked. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E:02 - Model scope: Gorenje washing-machine models covered by official manual 904001en - Region: Europe / English manual ## What users may observe - E:02 appears after Start/Pause is pressed - The programme does not begin or stops before washing - The door may look closed but the lock confirmation is missing ## Causes or fault boundaries - The door is not fully closed - Laundry or debris is interfering with the latch - A door-lock, wiring, or control fault requiring diagnosis ## Verified diagnosis - Photograph the complete E:02 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en - Confirm that the observed condition matches the published meaning: The washing machine cannot confirm that the door is locked - Confirm the display is exactly E:02 and record the full model - Stop the programme and wait until the drum is fully stopped - Open and close the door without forcing it, checking for laundry or debris near the latch - Unplug the washer, reconnect it once, and try one start - Arrange service if E:02 returns or the door will not lock - Published check — Close the door fully and clear only a visible obstruction - Published check — Gorenje publishes one controlled power restore ## Evidence-backed actions - Close the door fully and clear only a visible obstruction - Gorenje publishes one controlled power restore - a recurring E:02 needs door-lock and control diagnosis rather than a lock-part order from the code alone - If E:02 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Do not force the door or bypass the interlock. Wait for the drum to stop, isolate power before inspecting the latch area, and use service if the code returns. ## Primary evidence - Source: Gorenje official washing-machine manual 904001en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/904001en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.