# Gorenje washing machine E:03 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e03-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e03-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E:03: The washing machine is not receiving water within the expected filling conditions. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E:03 - Model scope: Gorenje washing-machine models covered by official manual 904001en - Region: Europe / English manual ## What users may observe - E:03 appears during filling - The programme pauses before the drum reaches its fill level - The inlet valve may be open but water flow is insufficient ## Causes or fault boundaries - The water inlet valve is closed - The inlet-hose filter is blocked - The supply hose is kinked or clogged - Water pressure is outside 0.05–0.8 MPa ## Verified diagnosis - Photograph the complete E:03 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en - Confirm that the observed condition matches the published meaning: The washing machine is not receiving water within the expected filling conditions - Confirm the display is exactly E:03 and record the model - Close the water tap and unplug the washer - Check that the inlet valve is open and the visible hose is not kinked - With water isolated, clean the user-accessible inlet-hose filter - Check household pressure against the manual's 0.05–0.8 MPa range, then reconnect and resume once - Published check — Correct a closed tap, visible hose restriction, or accessible inlet-filter blockage as Gorenje describes - Published check — A recurring E:03 with suitable supply needs service ## Evidence-backed actions - Correct a closed tap, visible hose restriction, or accessible inlet-filter blockage as Gorenje describes - A recurring E:03 with suitable supply needs service - do not select an inlet valve from the code alone - If E:03 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Close the water tap and unplug the washer before removing or cleaning the inlet filter. Stop immediately if the hose connection leaks. ## Primary evidence - Source: Gorenje official washing-machine manual 904001en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/904001en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.