# Gorenje washing machine E:07 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e07-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e07-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E:07: The washing machine cannot drain water through the expected route. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E:07 - Model scope: Gorenje washing-machine models covered by official manual 904001en - Region: Europe / English manual ## What users may observe - E:07 appears during draining - Water remains in the drum - The programme pauses before spin or completion ## Causes or fault boundaries - A dirty pump filter - A blocked drain hose or household drain - Incorrect discharge-hose height - A pump or control fault requiring service ## Verified diagnosis - Photograph the complete E:07 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en - Confirm that the observed condition matches the published meaning: The washing machine cannot drain water through the expected route - Confirm the display is exactly E:07 and record the model - Stop the programme and let hot water cool - Unplug the washer and drain residual water using the model's filter procedure - Clean the pump filter and inspect the drain hose, household drain, and discharge-hose height - Reconnect and resume once - arrange service if E:07 returns - Published check — Clear only an accessible pump-filter or drain restriction and correct a visible hose-routing problem ## Evidence-backed actions - Clear only an accessible pump-filter or drain restriction and correct a visible hose-routing problem - Gorenje's E:07 row does not confirm a pump replacement - use service when the route is clear but the code returns - If E:07 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Let hot water cool, unplug the washer, and drain residual water carefully before reaching the pump filter. Do not open the filter with power connected. ## Primary evidence - Source: Gorenje official washing-machine manual 904001en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/904001en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.