# Gorenje washing machine E:09 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e09-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e09-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E:09: The washer has detected a possible water leak in or around the appliance. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E:09 - Model scope: Gorenje washing-machine models covered by official manual 904001en - Region: Europe / English manual ## What users may observe - E:09 appears during or after a programme - Water may be visible near the base or hose connections - The washer may stop or show a safety warning ## Causes or fault boundaries - A visible hose or connection leak - Water around the appliance base - A leak-detection or internal water fault requiring service ## Verified diagnosis - Photograph the complete E:09 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en - Confirm that the observed condition matches the published meaning: The washer has detected a possible water leak in or around the appliance - Confirm the display is exactly E:09 and record the model - Stop the programme and close the water tap - Isolate power if water is near the plug or socket - Inspect only visible hose, door-seal, dispenser, and floor areas - Do not restart while a leak is active - arrange service if E:09 returns - Published check — Gorenje permits an exterior inspection when no leak is visible ## Evidence-backed actions - Gorenje permits an exterior inspection when no leak is visible - Do not tilt the washer, remove panels, or infer a seal or hose replacement from E:09 - Give service the E:09 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop the washer and isolate power if water is near the plug or socket. Do not tilt the machine or remove panels; an active leak requires service. ## Primary evidence - Source: Gorenje official washing-machine manual 904001en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/904001en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.