# Gorenje washing machine E10 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e10-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e10-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E10: The washing machine has detected a water-level sensor problem. This interpretation applies to Gorenje washing-machine models covered by official manual 964258en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E10 - Model scope: Gorenje washing-machine models covered by official manual 964258en - Region: Europe / English manual ## What users may observe - E10 appears during a programme - The water level may not behave normally - The code returns after the washer is restarted ## Causes or fault boundaries - A water-level sensing fault - A blocked washer filter or wall trap affecting draining - A model-specific wiring or control fault ## Verified diagnosis - Photograph the complete E10 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 964258en - Confirm that the observed condition matches the published meaning: The washing machine has detected a water-level sensor problem - Record E10 and the complete model number - Unplug the washer for at least one minute - Drain the appliance safely and clean the accessible pump filter - Check the visible wall trap or siphon for blockage - Reconnect and run one controlled test - contact service if E10 returns - Published check — Gorenje's published user boundary is power isolation plus clearing the accessible drain path ## Evidence-backed actions - Gorenje's published user boundary is power isolation plus clearing the accessible drain path - Do not open or replace the level sensor, hose, or control component without exact-model diagnosis - If E10 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Unplug the washer before draining or cleaning the pump filter. Do not open the sensor circuit or test internal wiring from E10 alone. ## Primary evidence - Source: Gorenje official washing-machine manual 964258en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964258en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.