# Gorenje washing machine E3 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e3-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e3-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E3: The washing machine is not filling with water correctly. This interpretation applies to Gorenje washing-machine models covered by official manual 964258en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E3 - Model scope: Gorenje washing-machine models covered by official manual 964258en - Region: Europe / English manual ## What users may observe - E3 appears during the fill stage - The drum does not reach the expected water level - The programme pauses or will not continue ## Causes or fault boundaries - The water tap is closed or the inlet hose is kinked - The inlet filter is restricted - Water pressure is outside the manual's stated range ## Verified diagnosis - Photograph the complete E3 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 964258en - Confirm that the observed condition matches the published meaning: The washing machine is not filling with water correctly - Confirm the display reads E3 and record the complete model number - Close the water tap and unplug the washer - Check that the tap is open, the inlet hose is not kinked, and its accessible filter is clean - Confirm the household supply can deliver at least 10 litres in 60 seconds and remains within the manual's 0.05–1 MPa range - Reconnect and run one fill test - arrange service if E3 returns - Published check — Correct a closed tap or visible hose restriction and clean the user-accessible inlet filter as the Gorenje manual shows ## Evidence-backed actions - Correct a closed tap or visible hose restriction and clean the user-accessible inlet filter as the Gorenje manual shows - Do not choose an inlet valve from E3 alone - use qualified service when the supply is suitable but the code returns - If E3 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Close the water tap and unplug the washer before removing the inlet hose or cleaning its filter. Stop immediately if a connection leaks. ## Primary evidence - Source: Gorenje official washing-machine manual 964258en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964258en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.