# Gorenje washing machine E7 / E7.2 error Canonical page: https://getfixfault.com/guides/gorenje-washing-machine-e7-e7-2-code AI-readable URL: https://getfixfault.com/guides/gorenje-washing-machine-e7-e7-2-code.txt Last reviewed: 2026-08-04 ## Direct answer Gorenje Washing machine E7 / E7.2: The washing machine cannot drain water normally. This interpretation applies to Gorenje washing-machine models covered by official manual 964258en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Washing machine - Error code or indicator: E7 / E7.2 - Model scope: Gorenje washing-machine models covered by official manual 964258en - Region: Europe / English manual ## What users may observe - E7 or E7.2 appears during draining - Water remains in the drum after the cycle stops - The pump may run without removing the water ## Causes or fault boundaries - A blocked pump filter or pump area - A kinked or blocked drain hose - A blocked household drain or an impeller obstruction ## Verified diagnosis - Photograph the complete E7 / E7.2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 964258en - Confirm that the observed condition matches the published meaning: The washing machine cannot drain water normally - Confirm E7 or E7.2 and record the model number - Unplug the washer and allow hot water to cool - Drain residual water using the model's pump-filter procedure - Clean the pump filter and inspect the drain hose, wall drain, and pump impeller for obstruction - Refit the filter, reconnect, and run one drain test - stop if the code returns - Published check — Remove only accessible lint, coins, or other obstructions and correct a visible hose kink ## Evidence-backed actions - Remove only accessible lint, coins, or other obstructions and correct a visible hose kink - Refit the pump-filter parts exactly as the manual shows - a recurring E7/E7.2 needs service rather than a pump order based on the code alone - If E7 / E7.2 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Unplug the washer and let hot water cool before opening the pump filter. Use towels and gloves because residual water and sharp objects may be present. ## Primary evidence - Source: Gorenje official washing-machine manual 964258en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/964258en.html - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.