# Gorenje Wine cabinet T1 error Canonical page: https://getfixfault.com/guides/gorenje-wine-cabinet-t1-official-code AI-readable URL: https://getfixfault.com/guides/gorenje-wine-cabinet-t1-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Gorenje Wine coolers T1: a wine-cabinet outside-environment temperature-sensor error. This interpretation applies to Gorenje wine-cabinet models covered by official manual 875287en in Europe / English manual. ## Exact scope - Brand: Gorenje - Appliance: Wine coolers - Error code or indicator: T1 - Model scope: Gorenje wine-cabinet models covered by official manual 875287en - Region: Europe / English manual ## What users may observe - T1 is shown on the Gorenje wine coolers display, indicator, or connected app - The published condition is: a wine-cabinet outside-environment temperature-sensor error - The control cannot confirm the documented measured condition or sensor reference represented by T1 - The important observation is when T1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a wine-cabinet outside-environment temperature-sensor error - T1 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Gorenje wine-cabinet models covered by official manual 875287en ## Verified diagnosis - Photograph the complete T1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Gorenje wine-cabinet models covered by official manual 875287en - Confirm that the observed condition matches the published meaning: a wine-cabinet outside-environment temperature-sensor error - Published check — Record T1 and the full model number, then contact an authorised Gorenje service centre - Published check — do not test the sensor circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that Gorenje does not specify for T1 - Published check — Give service the T1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for T1 ## Evidence-backed actions - Record T1 and the full model number, then contact an authorised Gorenje service centre - do not test the sensor circuit - Give service the T1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Record T1 and the full model number, then contact an authorised Gorenje service centre; do not test the sensor circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Gorenje official wine-cabinet manual 875287en - Source URL: https://partners.gorenje.com/fts/htmlNavodila/875287en.html - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.